Western Redcedar

Western Redcedar - Coniferales Cupressaceae Thuja plicata

 
 
 

Identification & Description:
The western redcedar is found mainly in Western Canada and the United States. In the past, Amerindians sculpted totem poles and dugout canoes up to 20 metres long from western redcedar logs. One of these canoes is on display at the Canadian Museum of Civilization in Ottawa.

A large tree, the western redcedar grows to more than 60 metres high and can live up to 800 years.

Being intolerant of dry periods and intense heat, it is found in wet, even oppressively wet regions. The ocean climate suits it perfectly. Yet, paradoxically, it can also be found in dry but very acid soils.

It seldom occurs in pure stands, and is usually mixed with other species such as Douglas-fir, Sitka spruce and western hemlock.

Its wood has a characteristic cedar odour, and is soft and light. It has yellow sapwood, and pinkish-brown heartwood.

Highly resistant to decay, western redcedar wood is valued for shakes, shingles, poles, posts, boat-building, patios, exterior siding and window frames.

Western redcedar (Thuja plicata), also called Pacific redcedar, giant-cedar, arborvitae, canoe-cedar, and shinglewood, is the only Thuja species native to western North America. Extant redcedar volumes are estimated to be 824 million m? (29 billion ft?) in British Columbia (43) and 228 million m? (8 billion ft?) in the United States (16). Most of this volume is in mature trees, which have tapered, often-fluted bases, drooping branches, thin fibrous bark, and small scalelike leaves arrayed in flat sprays. Many have forked tops. They often reach ages of 800 to 1,000 years. One particularly large specimen in Washington has a d.b.h. of 592 cm (233 in), a height of 54.3 m (178 ft), and a crown spread of 16.5 m (54 ft). The wood is valuable and extensively used in a wide variety of products.

Unique Features
• Drooping branches that turn up at tip
• Trunk spreading out at the base
• Has large number of cones bent backward along the branches

Physical Characteristics
An evergreen tree growing to 60m by 12m at a fast rate. It is hardy to zone 6. It is in leaf all year, in flower from March to April, and the seeds ripen from September to October. The scented flowers are monoecious (individual flowers are either male or female, but both sexes can be found on the same plant) and are pollinated by Wind. We rate it 2 out of 5 for usefulness.

The plant prefers light (sandy), medium (loamy) and heavy (clay) soils and can grow in heavy clay soil. The plant prefers acid, neutral and basic (alkaline) soils and can grow in very alkaline soil. It can grow in semi-shade (light woodland) or no shade. It requires moist or wet soil. The plant can tolerate maritime exposure.

Edible Uses
Gum; Inner bark.
Inner bark - fresh or dried. The inner bark can be dried, ground into a powder and then used as a thickening in soups etc or mixed with cereals when making bread.

A pitch obtained from the trunk has been used as a chewing gum

Other Uses
Baby care; Basketry; Brush; Dye; Fibre; Fuel; Fungicide; Hair; Hedge; Insulation; Paper; Roofing; Scourer; Shelterbelt; Stuffing; Thatching; Tinder; Wick; Wood.
Tolerant of light trimming and of reasonable exposure, this species can be grown as a hedge or as part of a shelterbelt.

An infusion of the boughs can be used as a hair wash to treat dandruff and scalp germs.

The fibrous inner bark can be pounded until it is soft and then used as a sponge for scouring dishes etc, or can be used for making rough clothing, blankets, mats, ropes, sanitary towels, a padding in a baby's cradle, nappies etc. Waterproof hats, capes, trousers, skirts etc can be made from the inner bark. It is also used in thatching and as a stuffing material for mattresses. Inner bark strips have been used as a roofing material. The bark has also been used to make paint brushes.

The inner bark has been used to make a wick for oil lamps.

The inner bark has been used for making baskets.

The roots are used in basket making, making nets etc. The roots have been used in coiled and imbricated baskets. The roots have been peeled, split and used to make coiled watertight baskets that can be used for boiling water. The roots are harvested in the spring or early autumn when it is easier to remove the bark. The outer strips of the roots are used to make the bottom of the basket, the centre core is used in the coils and the root bark, because of its toughness, is used to make the edges.

The fibrous bark is used for roofing and the sides of shelters. It is also used as an insulation.

A fibre obtained from the bark is used in making paper. The fibre is about 3.8mm long (this refers to the heartwood fibre, the inner bark fibre is probably longer). Branches can be harvested at any time of the year, they are cut into usable pieces and pre-soaked in clear water prior to cooking. They are then cooked for six hours or more with lye. It is difficult to rinse it to clear water because it seems to be a dye material. The fibre is then hand pounded with mallets, or put through a blender or a ball mill for six hours. It is difficult to hydrate properly. The resulting paper is a rich deep brown/red.

The slender pliable branches are used as a high quality rope. They are gathered in spring, peeled and, if thick, are split into halves or quarters. They are then twisted and worked until soft and pliable and finally woven together to make the rope.

A green dye can be obtained from the leaves and twigs.

The inner bark can be used as a tinder.

Wood - aromatic, light, soft, straight-grained, not strong, very resistant to decay. This resistance to decay is probably due to the existence of powerful fungicides in the wood. The wood from fallen trees remains sound for at least 100 years. It is pale to dark red in colour. The wood was widely utilized by many native North American Indian tribes who used it for making a wide range of items including canoes, houses, totem poles, bowls, spoons, ladles and tools. It is currently used in making greenhouses. The wood is not of such good quality when grown in mild humid areas. It makes a good fuel, burning with very little smoke, though it burns quickly.

Habitat
Native Range
Western redcedar grows along the Pacific coast from Humboldt County, CA (lat. 40° 10' N.), to the northern and western shores of Sumner Strait in southeastern Alaska (lat. 56° 30' N.). In California, it is common only in the lower Mad River drainage and the wet region south of Ferndale in Humboldt County; it is found elsewhere only in isolated stands in boggy habitats (19). North of the California-Oregon border, the coastal range broadens to include the western slopes of the Cascade Range north of Crater Lake and the eastern slopes north of about latitude 44° 30' N. (12). Optimal growth and development of western redcedar are achieved near the latitudinal center of its range- Washington's Olympic Peninsula.

North of the Olympic Peninsula and Vancouver Island, the coastal range narrows again and is restricted to the Coast Ranges and offshore islands. A few scattered stands are found between the Coast Ranges and the Selkirk Mountains near the southern border of British Columbia, but redcedar's coastal range is essentially isolated from its interior range.

The interior range extends south from the western slope of the Continental Divide at latitude 54° 30' N. in British Columbia through the Selkirk Mountains into western Montana and northern Idaho. The southern limit is in Ravalli County, MT (lat. 45° 50' N.). With the possible exception of a few trees east of the Continental Divide near the upper end of St. Mary Lake, Glacier County, the eastern limit of the range of redcedar is near Lake McDonald in Glacier National Park, MT.

Climate
Coastal western redcedar receives from less than 890 mm (35 in) of annual precipitation to more than 6600 mm (260 in), mostly as winter rainfall; interior western redcedar, about 710 mm (28 in) in the north, 810 to 1240 mm (32 to 49 in) farther south-about half as spring and autumn rain, one-third as winter snow.

Although western redcedar is abundant in many forested swamps, it is sometimes found on sites that are too dry for western hemlock (Tsuga heterophylla), probably because the root penetration of the redcedar is better. Redcedar leaves are not protected from excessive transpiration by cutin and wax.

Trees tolerate stagnant winter water tables averaging less than 15 cm (6 in) below the soil surface on the Olympic Peninsula. The species dominates wet ravines and poorly drained depressions in both Glacier National Park in Montana and the Selway Bitterroot Wilderness in Idaho.

Where sufficient precipitation is present, low temperature appears to limit the species' range. Length of the frost-free period abruptly decreases just above the tree's upper elevation limits on Vancouver Island. The northern limits of western redcedar lie between the 11.1° and 11.7° C (52° and 53° F) mean summer temperature isotherms in southeastern Alaska. Absolute minimum temperatures experienced by western redcedar in British Columbia are -10° to -30° C (14° to -22° F) in coastal populations, -14° to -47° C (7° to -53° F) in the interior. Western redcedar has a growing season of at least 120 frost-free days along the coast but as few as 75 frost-free days in some portions of its interior range. It is not resistant to frost and is sometimes damaged by freezing temperatures in late spring or early autumn.

Soils and Topography
Western redcedar can tolerate a wide range of soil proper-ties in most localities. Soils on which it is most commonly found are in the orders Inceptisols, Ultisols, and Histosols. It is found on all landforms, soil textures, and parent materials on Vancouver Island. In southwestern Oregon, it grows on sedimentary, metasedimentary, gabbroic, dioritic, granodioritic, and occasionally even serpentinite and peridotite parent materials. Coarse sandy soils are not well suited to establishment and growth of redcedar in northern Idaho and northeastern Washington, but rocky slopes with limited soil development support redcedars in southeastern Alaska. Poorly drained organic soils also support redcedar south of Petersburg, AK. It grows on loams, clays, sands, chalk downland, and Molina-Juncus peat in England, but is most competitive on fine-textured lowland soils there. It grows well on shallow soils over chalk and can tolerate both acid and alkaline soil conditions.

Western redcedar seems able to survive and grow on soils that are low in nutrients and is found on such soils over much of its natural range. Site index is positively correlated with foliar nitrogen, sulfur, copper, boron, and chlorophyll. However, productivity may be improved by fertilization. When grown in well watered soil fertilized with nitrogen, phosphorus, and potassium, redcedar seedlings outgrow the seedlings of Douglas-fir (Pseudotsuga menziesii), grand fir (Abies grandis), Sitka spruce (Picea sitchensis), western hemlock, and ponderosa pine (Pinus ponderosa). Available nitrogen, calcium, and water appear to be the most important factors affecting growth and establishment of redcedar. Established redcedars tend to raise soil cation exchange capacities, pH's, and amounts of exchangeable calcium and thus benefit the soils in which they grow.

Western redcedar grows from sea level to 910 m (3,000 ft) in southeastern Alaska. In British Columbia, the elevational range is higher-from sea level to 1190 m (3,900 ft). Redcedar is found in the interior from 320 m (1,050 ft) to 2130 m (7,000 ft).

The greatest range in elevation occurs in Oregon, where the species occurs from sea level to 2290 m (7,500 ft) at the rim of Crater Lake.

Associated Forest Cover
Pure stands of western redcedar cover some small areas, but it is usually associated with other tree species. Along the coast these include black cottonwood (Populus trichocarpa), bigleaf maple (Acer macrophyllum), western hemlock, mountain hemlock (Tsuga mertensiana), Sitka spruce, western white pine (Pinus monticola), lodgepole (shore) pine (P. contorta), Port-Orford-cedar (Chamaecyparis lawsoniana), Alaska-cedar (C. nootkatensis), incense-cedar (Libocedrus decurrens), Douglas-fir, grand fir, Pacific silver fir (Abies amabilis), red alder (Alnus rubra), Pacific madrone (Arbutus menziesii), and Pacific yew (Taxus brevifolia). Several of these species (black cottonwood, western hemlock, western white pine, Douglas-fir, grand fir, and Pacific yew) are also associated with western redcedar in the interior. Subalpine fir (Abies lasiocarpa), western larch (Larix occidentalis), Engelmann spruce (Picea engelmannii), white spruce (P. glauca), lodgepole pine, and ponderosa pine are also associated with redcedar in the interior.

Coastal redcedar plant communities in British Columbia have been classified into 24 associations under 9 alliances in the Thuja-Rubus spectabilis order. Communities listed in less detailed coastal classifications include redcedar/swordfern, redcedar/devilsclub/maidenhair fern, redcedar/maidenhair fern-ladyfern, redcedar-western hemlock/devilsclub/ladyfern, redcedar-grand fir/mountain boxwood, redcedar-grand fir/swordfern, redcedar-Douglas-fir/Oregongrape, redcedar-Sitka spruce-red alder/skunkcabbage-slough sedge, and redcedar/skunkcabbage.

The redcedar/skunkcabbage plant community also occurs in the interior; where redcedar/devilsclub, redcedar/devilsclub/coolwort (Tiarella trifoliata), redcedar/queenscup (Clintonia uniflora), and redcedar/maidenhair fern are found.

Life History
Reproduction and Early Growth
Flowering and Fruiting- When grown in the open, western redcedars begin to produce strobili at 10 years of age and usually every other year thereafter. Strobilus development can be artificially induced at younger ages and increased in mature trees by girdling or treating with gibberellin. The species is monoecious; male and female strobili are produced on different branches of the same tree, at different heights-the reddish male strobili on lower branches and the green female strobili nearer the treetops and farther from the trunk. Anthesis and pollination occur during March and April in southern stands near the coast. They occur during May and June in coastal Alaska and interior stands.

Seed Production and Dissemination- Each mature strobilus usually produces only 3 to 6 seeds, but the strobili are often numerous and heavy seed crops are common. In dry years, conebearing stands in the interior tend to be on high, moist sites. Average annual seed crops vary from 247,000 to 2,470,000 seeds per hectare (100,000 to 1 million/acre) in coastal forests and from 54,000 to 274,000/ha (22,000 to 111,000/acre) in the interior. Major seedfall occurs during October and November in both ranges. Gibberellin-treated, containerized seed orchards should permit efficient management of seed production and harvesting.

Seeds are small- 448,000 to 1,305,000/kg (203,000 to 592,000/1b). They fall faster and do not fly as far as the seeds of western hemlock, Sitka spruce, and Douglas-fir, but dissemination is adequate within 100 m (330 ft) of a seed source. The seeds usually germinate well without stratification, and they retain their initial viability for at least 7 years when stored dry (5 to 8 percent moisture) at -18° C (0° F). Germination is epigeal.

Seedling Development- Most seeds escape rodent and bird predation, but seedling mortality is high during the germination period. Where moisture and temperature conditions are favorable, germination can occur in the autumn, winter, or spring. Almost no germination occurs after the first year, however. Seedbed quality may be critical.

Throughout the range of western redcedar, disturbed mineral soil seedbeds seem to be a major requirement for regeneration from seed. Although unburned soil benefits redcedar more than soil that has been scorched, slash burning favors redcedar by creating more mineral soil surfaces in cutover areas. Rotten wood that is in contact with the soil is the preferred seedbed in old redcedar groves. Partial shade is beneficial because drought and high soil temperature damage seedlings in full sunlight, and poor root penetration causes damage from drought in full shade.

Direct seeding in the autumn is successful where soil moisture is available, but large quantities of seed may be required to obtain adequate stocking. In the nursery, spring sowing is best; half-shaded seedbeds are recommended. Pelleting the seeds makes them more compatible with automated nursery sowing machinery. Containerized nursery seedlings can be produced in 7 months. They survive as well or better than bare-root stock when planted in coastal Oregon, Washington, and British Columbia, but 2-year-old bare-root stock tends to be most cost effective in the coastal range . When bare-root stock is planted, recently lifted dormant seedlings with low shoot/root ratios should be used and cold storage avoided whenever possible. Containerized stock planted in the spring appears to perform better than bare-root stock in the interior. Natural regeneration is important in the northern Rocky Mountains, where it is most frequently successful on westerly and northerly aspects in western redcedar habitat types.

Western redcedar seedlings are less tolerant of high soil temperature and of frost than are the seedlings of Engelmann spruce, grand fir, and Douglas-fir. The exposed upper foliage of young redcedars often sunburns severely. Roots of seedlings grow more slowly than the roots of Douglas-fir and incense-cedar, but they outgrow the roots of seedling western hemlock and Sitka spruce. Shoots have a longer growth period than any associated conifer. Non-rigid leaders are produced, and neither lateral nor terminal shoots form dormant buds. Lateral shoot growth is vigorous, amounting to at least 80 percent of terminal shoot growth in young redcedars. Seedlings account for most of the western redcedar regeneration in clearcuts and other disturbed areas. On good coastal sites, they grow as tall or taller than Douglas-fir, western hemlock, and Sitka. spruce seedlings during the first 5 years. The redcedars are subsequently overtaken by Douglas-fir (by age 10) and western hemlock (by age 15).

Vegetative Reproduction- Three types of natural vegetative reproduction occur: layering, rooting of fallen branches, and branch development on fallen trees. The resulting "veglings" are more abundant than seedlings in mature Idaho stands (40). Saplings that have been knocked down in the western Cascades often regenerate when their branches root.

Redcedar clones are easily propagated by the rooting of stem cuttings. Although untreated cuttings will root, a 1-minute dip in a 3,000 ppm solution or a 4-hour soak in a 200 to 400 ppm solution of indolebutyric acid improves rooting speed, the number of cuttings rooted, and the total length of roots per cutting. Ramets for seed orchards can be produced by treating cuttings with indolebutyric acid, then rooting them in a 1-to-1 mixture of peat and perlite. Young fragmented stems can be induced to bud after being soaked in a cytokinin solution, and the resulting buds can be rooted on a culture medium that contains napthalineacetic acid and kinetin.

Sapling and Pole Stages to Maturity
Growth and Yield- Intermediate redcedars are distinguishable from dominants by age 5 on good sites. Codominants usually can be differentiated from dominants by age 25. Mean annual height growth of the dominants is 0.5 m (1.64 ft) in 40- to 60-year-old, pure, second-growth stands on moist sites in western Washington. Annual radial increments of 10 mm or even 20 mm (0.4 to 0.8 in) occur on the best moist sites in the south coast region of British Columbia.

Pure, even-aged stands can attain volumes comparable to pure Douglas-fir stands by age 50 on high-quality upland sites in western Washington, Plantations should be dense (about 2,470 trees per hectare or 1,000/acre), and intermediate crown classes should be removed in a light thinning to reduce side shade at about age 25. Stands of 370 to 430 crop trees/ha (150 to 175 crop trees/acre) at time of harvest may allow maximum diameter growth without causing poor form. Maintaining a nearly closed canopy at all times will benefit form because open-grown redcedars tend to develop excessively large limbs and multiple tops. Faster growing trees of acceptable quality can be grown at wide spacings if their lower holes are pruned, but percentages of latewood decrease significantly.

Volumes of 379 to 825 m?/ha (5,418 to 11,782 ft?/acre) were measured in 40- to 60-year-old pure second-growth stands on moist sites in western Washington (36). A yield model on medium sites in British Columbia indicates yields of 70 m?/ha (1,000 ft?/acre) at age 40, 350 m?/ha (5,000 ft?/acre) at age 115, and 595 m?/ha (8,500 ft?/acre) at age 270; maximum current annual increment occurs at 82 years and maximum mean annual increment at 130 years.

In Great Britain, the cumulative volume produced by normal western redcedar stands on poor sites is 50 m?/ha (714 ft?/acre) at age 20 and 953 m?/ha (13,620 ft?/acre) at age 80. On good sites, cumulative volume produced is 232 m?/ha (3,315 ft?/acre) at age 20 and 1839 m?/ha (26,268 ft?/acre) at age 80. The average age of maximum mean annual increment is 72 on poor sites and 58 on good sites in these British stands. At ages 20 and 50, cumulative volume production is lower for western redcedar than for Douglas-fir and Sitka. spruce in Great Britain, but by age 80 the redcedar volume production is higher than that of Douglas-fir and spruce.

Growth is often much slower. Suppressed redcedar trees that are 200 years old but only 7.6 cm. (3 in) in d.b.h. and 7.6 m (25 ft) tall are not unusual. Survival for such long periods of suppression may be due to the ability of the species to produce new root growth in full shade. It may also be a result of frequent root grafting. Dominant trees often support growth of the root systems and lower boles of suppressed trees.

Rooting Habit- Tree roots are extensive. Redcedars made up only 17 percent of the basal area but accounted for 82 percent of the root length in a mixed-species stand in northern Idaho. Tap roots are poorly defined or nonexistent, but fine roots develop a profuse, dense network.

Western redcedar roots usually are deeper than the roots of western hemlock but shallower than the roots of western larch, western white pine, grand fir, and Douglas-fir. The soils on which these species usually grow may be responsible, however, because western redcedar, western hemlock, and Douglas-fir trees of similar size growing on similar soils have roots that penetrate to similar depths and extend over similar areas. Shallow root systems are most frequent where soil bulk density is high. Redcedar roots cannot grow in dense soils penetrated by the roots of Douglas-fir, red alder, lodgepole pine, and Pacific silver fir. Redcedar root systems also tend to be shallower and less extensive on wet sites than they are on deep, moderately dry soils.

Where a thick duff layer is present, many redcedar roots lie in the duff rather than in the underlying soil. Root grafting is common. Western redcedar mycorrhizae are of the vesicular-arbuscular type, and redcedar seedlings are more responsive to mycorrhizal inoculation than are the seedlings of redwood (Sequoia sempervirens), incense-cedar (Libocedrus decurrens), and giant sequoia (Sequoiadendron giganteum).

Reaction to Competition- Only Pacific silver fir, western hemlock, and Pacific yew are more tolerant of shade than western redcedar. Its relative tolerance may be higher in warm than in cool areas, but redcedar is very tolerant wherever it grows, and it may be "the species of choice" for reforesting high, brush-risk areas near the coast. Often present in all stages of forest succession, redcedar occupies pioneer, seral, and climax positions. Multiple attributes seem to be responsible-redcedar invades disturbed areas as widely distributed seeds but regenerates vegetatively in undisturbed areas, tolerating competition in both. Nevertheless, it is usually considered a climax or near climax species.

Western redcedar is best managed on moist sites characterized by the presence of ladyfern, queenscup, mountain woodfern, oakfern (Gymnocarpium dryopteris), or thimbleberry. On poorly drained sites of lower quality, fertilizing with nitrogen appears to benefit growth. Urea seems to be a better source of that nitrogen than ammonium nitrate. Redcedar can be grown in stands of mixed species where uneven-aged management is practiced or when redcedar poles are to be produced under normal even-aged management regimes. But pure stands are more suitable for the long rotations needed to produce large sawtimber, shingles, and shakes.

Where western redcedar is managed in mixed-species or uneven-aged stands, its excellent shade tolerance and long life should be considered. Redcedar is usually overtopped by Douglas-fir, grand fir, western hemlock, and western white pine. It tolerates understory conditions in mixed-species stands but often grows slowly there. In uneven-aged stands, western redcedar can maintain acceptable growth rates over long periods, but it should not be given excessive crown space. Thinning from above may release the redcedars in mixed-species stands; thinning from below is preferable in uneven-aged stands of western redcedar. In the northern Rocky Mountains, growth response to release is best on large, young redcedars with green-yellow foliage growing on northerly aspects. Redcedars probably should not be released when overtopped, however, because much of the increased growth after their release often occurs in large branches and a spreading crown rather than stem wood.

Most western redcedars are harvested by clearcutting the mixed-species stands in which they grow. Because of steep terrain, decay, and breakage, redcedar harvesting costs are high and lumber recovery is low. Redcedars should not be left as scattered seed trees, however; even those along clearcut margins may be lost to windthrow or exposure. Effects of slash-burning vary with site conditions, but low-impact spring burns tend to benefit the mycorrhizal colonization of seedlings.

Damaging Agents- Western redcedar is less susceptible than its associates to most damaging agents, but, as it is longer lived, damaged trees are common. Although they are as windfirm as Douglas-fir on dry sites, redcedars, are often windthrown in wet environments and are not resistant to windthrow on the moist sites where growth and yield are highest. Fire resistance also varies with environment. Redcedar is more severely damaged by fire than any of its associates along the coast but is less susceptible than Engelmann spruce, western hemlock, and subalpine fir in the interior.

Western redcedar suffers little damage from insects, but it is a host for several economically important insect species . One of the most important is the gall midge, Mayetiola thujae, which sometimes seriously damages redcedar seeds in Oregon, Washington, and British Columbia. Newly planted seedlings are occasionally damaged by a weevil (Steremnius carinatus) in British Columbia, and larger trees are killed by a bark beetle (Phloeosinus sequoiae) on poor sites in southeastern Alaska. The western cedar borer (Trachykele blondeli) causes degrade and cull in sawtimber.

More than 200 fungi are found on western redcedar, but it is less susceptible to pathological attacks than are most of its associates. Indeed, redcedar may be a suitable alternative species on coastal Douglas-fir and western hemlock sites where soils are infected with Phellinus weiri, Fomes annosus, or Armillaria spp. . Nevertheless, many attacks occur during the long lives of some redcedar trees, and the heartwood extractives that provide decay resistance are eventually detoxified through biodegradation by a series of invading fungi. As a result, the volume of accumulated decay in living trees is greater for western redcedar than for any other major conifer in British Columbia, and hollow old trees are common in the interior.

The major seedling disease, Didymascella thujina, is a leaf blight that infects 2nd- and 3rd-year nursery seedlings. As much as 97 percent of the natural redcedar reproduction may also be killed when this blight reaches epidemic proportions. Epidemics are rare in North America, however, and Didymascella is not as damaging here as it is in Europe, where the disease seriously limited production of planting stock until cycloheximide fungicides were developed.

In North America, the most important fungi attacking redcedar are root, butt, and trunk rots. The root and butt rots include Phellinus weiri, Armillaria mellea, and Poria subacida. Poria asiatica and P. albipellucida are the most important trunk rots near the coast; P. asiatica and Phellinus weiri are most important in the interior range of western redcedar. These rots are most evident in old stands, where much of the standing volume is often defective and unmerchantable.

Redcedar seedlings and saplings are often severely browsed by deer, elk, or rodents, and browse damage may be the most important stand-establishment problem.

Western redcedar is damaged more than Sitka spruce by salt spray. Its foliage is more severely damaged by sulfur dioxide than is the foliage of Douglas-fir, western hemlock, and Sitka spruce and less damaged than the foliage of subalpine fir and grand fir. Redcedar is damaged less than Douglas-fir by airborne fluorides and ozone.

Special Uses
• Modern - house siding, interior paneling, outdoor furniture, decking, fencing, roof shakes
• Traditional - wood: canoes, totem poles, longhouses, household boxes, tools, paddles; pounded fibres: mats, clothing, baskets, nets, fishing lines; medicines, religious masks

Shingles and shakes constitute the most important special use of redcedar. Attractive appearance, durability, lightness, and superior insulation qualities probably are responsible for its popularity as a roofing material. Wood is also used in utility poles, fenceposts, piling, paper pulp, clothes closets and chests, caskets, crates, boxes, beehives, and fishtrap floats. Perfumes, insecticides, medicinal preparations, veterinary soaps, shoe polishes, and deodorants are made from cedar leaf oil. Redcedar extractives and residues are used in lead refining, boiler-water additives, and glue extenders . When properly trimmed, redcedars make excellent hedges. Their drooping branches, thin fibrous bark, and flat sprays of scalelike leaves make redcedars attractive ornamental trees. The leaves are a major winter food for big game in the northern Rocky Mountains, and deer browse redcedar all year along the coast.

Genetics
Population Differences
Western redcedar seems to vary less than other northwestern conifer species. Lack of isoenzyme variation in newly germinated seedlings from western Oregon and eastern and western Washington indicates that redcedar populations contain little genetic polymorphism . Isoenzyme variability is also low in British Columbia. Leaf oil terpene composition is similar in populations at both low and high elevations in British Columbia, Washington, Oregon, Idaho, and Montana; but small differences between coastal and interior populations were recently detected by discriminant analysis of the chemical data . Seedlings from different seed sources usually have remarkably similar forms and growth rates when grown in the same environment. Inland populations are more tolerant of frost than those from coastal populations, however, and plantation trials indicate that provenances from Alaska are inferior to those from Oregon and Idaho when grown in Poland. Seed orchards have been established in Denmark, where resistance to leaf blight and frost have been shown to be homozygously recessive .

Cultivation details
Prefers a moist loamy soil. Dislikes dry soils. Not suitable for light sandy soils because it is shallow rooting, but it succeeds on most other soil types, even on waterlogged soils and heavy clays. Succeeds in chalky soils. Prefers some shelter from the wind according to some reports whilst others say that it is fairly wind resistant. Trees tolerate salt winds but not severe maritime exposure[K].

The wood and foliage are highly aromatic. The foliage has a strong fruity smell, like pear-drops or crushed apples.

A fast growing tree, it often puts out new growth of 1 metre a year and can average 60cm a year for the first 40 years. Increase in girth can also be rapid, 5cm a year for the first 60 years has been recorded. Sometimes planted for forestry in Britain, it is at its best in the moister western half of the country.

There are many named varieties selected for their ornamental value.

Tolerant of light trimming, so long as this is not back into old wood, plants also retain their lower branches unless these are shaded out by neighbouring plants.

The foliage turns bronze in cold weather.

Trees are notably susceptible to honey fungus.

Propagation
Seed - best sown when ripe in the autumn in a cold frame. Stored seed germinates best if given a short cold stratification. It can be sown in a cold frame in late winter. When they are large enough to handle, prick the seedlings out into individual pots and grow them on in the greenhouse for their first winter. Plant them out into their permanent positions in late spring or early summer, after the last expected frosts.

If growing large quantities of plants, the seed can be sown in an outdoor seed bed in mid spring. Grow the plants on for two years and then plant them out into their permanent positions in late autumn or early spring.

Cuttings of half-ripe wood, 5 - 8cm with a heel, July/August in a shaded frame. Forms roots by the end of September but it should be overwintered in a frame.

Cuttings of almost ripe wood, 5 - 10cm with a heel, September in a cold frame. Forms roots in the following summer. Plant out in autumn or spring.

Scent
Stem: Crushed
The wood and foliage are highly aromatic.
Leaves: Crushed
The wood and foliage are highly aromatic. The foliage has a strong fruity smell, like pear-drops or crushed apples.

News & Events

Prev Next

World Ocean Day - Jun 8, 2014

June 8 at Blackie SpitWe're looking for volunteers to help staff our boothhttp://www.surrey.ca/culture-recreation/11253.aspx Read more

Salmon workshop - May, 2014

Salmon workshop - May, 2014

Postponed until May, 2014 Evergreen, a national organization that aims to inspire action to green cities, is organizing an upcoming Salmon in the City Workshop about the importanc... Read more

Party for the Planet - April 26,…

April 26 at City Hall PlazaWe're looking for volunteers to help staff our boothhttp://www.surrey.ca/partyfortheplanet/   Read more

Discovery Days - Mar 26, 2014

March 26 at the Surrey Nature CentreMeet a nature guide who will get you started with your discoveries in the forest.  Create an eco-craft, explore with a scavenger hunt and and le... Read more

Western Red Cedar

Western Red Cedar

Western Red Cedar – submitted by Peter Maarsman One of the questions we get asked is, “What is the official tree of British Columbia?” Answer:  It is the Western Red Cedar and it ... Read more

Summer 2012 Story

Summer 2012 Story

What happens to blown-over trees?    by Peter Maarsman During the winter and spring, there have been a lot of strong winds which have blown over more trees. I get asked all the tim... Read more

Summer Handout 2012

Summer Handout 2012

Message from the GTHS Past-President, Peter Maarsman What a beautiful time to be in Green Timbers Forest. It is a time of rebirth and there is excitement all over the forest as tr... Read more

Volunteer Request Form

VOLUNTEER OPPORTUNITY REQUEST FORM Our Mission Volunteer Resources leads the growth and development of the City of Surrey's volunteer movement by: • Continually ... Read more

GTHS eNewsletter

 

Follow Green Timbers

FacebookTwitterLinkedinFeed

Green Timbers Heritage Society

© 2002-2013, Green Timbers Heritage Society. All Rights Reserved! 14225 Green Timbers Way, Surrey, BC V3T 0J2